About Us

About Us

Sharp Cut Tools India

Sharp

Dear Customer,

We are manufacturing H.S.S. cutting tools from imported steels,M-2
,M-35, M-42 and T-42 grades, for engineering industries.

Tool bits such as rounds, square, partings, step cut punches and other
tools as per drawing are used for high cutting rates of very hard metals
since cutting speeds involved in these tools. Often caused high
temperature at tool tip into red range, they must be resistant to
tempering at this temperature.

An End Mill is cutter with teeth on periphery and with shank for holding
and driving. End Mills are designed for milling of slots and pockets where
plug cutting is not necessary for producing a fine and milled finish.

For parallel hand Reamer having virtually parallel cutting edge with
taper and beveled a shank of nominal diameter of a cutting edge and with
square of end. It is generally used by hand of final sizing of holes while
machine reamer has taper shank.

Centre drills is known as a combined drills, are designed with spiral and
straight flutes for giving long tool life and high quality to the centre hole
where accurate centering is essential.

Taper pin reamers are designed to ream holes where standard taper pin
will fit.
Wood ruff cutter is a circular cutter integral with parallel shank for
holding and driving, having definite diameter and width with sides. Side
and Face cutter are circular in shape, with the periphery on both side,
and are used for side milling and slotting.

High speed steel is made of alloying elements Tungsten, Molybdenum,
Vanadium, Chromium and Cobalt.

Tungsten and Molybdenum for carbide formation and red hardness
Vanadium increase abrasion resistance and Chromium for reducing
oxidation and increase hardness.
Cobalt is added to improve high temperature hardness up to red point.

30/2 street no-10
Vishwas Nagar
Delhi- 110032
ph: 911122382517
alt: 919313805182